Rittenhouse SuperMix Agitator Kit for Sprayer Tanks

Description

The Rittenhouse SuperMix Agitator Kit includes all the required items to allow you to maintain an even spray rate on 100 US gallon sprayer tanks or larger for wettable powders, emulsions, and solutions.
It connects to the pressure or bypass line, providing steady tank agitation to keep products in suspension.
Rittenhouse SuperMix Agitator Kit includes:
1 x SuperMix Agitator # 502053
10' x 3/8" ID Kuri Tec Yellow Spray Hose 1661-06
1 x Brass 90° Hose Barb Elbow Fitting 3/8"
1 x Brass Straight Hose Barb Fitting 3/8"
1 x Hex Plug 1/2"
1 x Poly Hose Barb 3/4" NPT x 3/4" HB
1 x Poly Hose Barb 3/4" NPT x 1" HB
Installation:
Unscrew the ring nut from the Agitator's white end.
Cut a hole in the tank that is big enough for the Agitator's white end to fit through (4").
Put the Agitator's white end through the hole from inside the tank so it sticks out of the tank.
Ensure the rubber gasket is on the inside of the tank.
Screw the ring nut back onto the Agitator from the outside, securing it in the tank.
Plumb your agitation line to the 1/2" metal male thread in the center.
Plumb your return line to the 3/4" female NPT inlet on the one side.
Plug the 1/2" female NPT inlet on the other side.